{"id":195,"date":"2015-10-14T14:13:57","date_gmt":"2015-10-14T14:13:57","guid":{"rendered":"http:\/\/www.aaronparsekian.com\/?p=195"},"modified":"2015-10-14T16:26:59","modified_gmt":"2015-10-14T16:26:59","slug":"color-composition","status":"publish","type":"post","link":"http:\/\/www.aaronparsekian.com\/?p=195","title":{"rendered":"Color Composition"},"content":{"rendered":"

This week we explored color. We were asked to make a composition using color. I started out by taking the hue test:<\/p>\n

\"Screen<\/a><\/p>\n

I wonder if I would do any better with my calibrated monitor at home?<\/p>\n

Next I decided I wanted to\u00a0do some physical control to manipulate the hue, saturation, and brightness of my ‘composition’ \u00a0– since it would be very related to how I want to use my programming knowledge as a lighting designer.<\/p>\n

I started out by trying to use some addressable LED tape that I had. This turned very frustrating very quickly. The library used to control this tape is no cake-walk, and I found myself in over my head after two days of messing with it.<\/p>\n

I turned to a slightly simpler route and used p5 and an arduino to change the H\/S\/B of some squares on screen via a slider and two knobs.<\/p>\n

\"IMG_1081\"<\/a><\/p>\n

 <\/p>\n

Here are some of the outputs:<\/p>\n

\"ss3\"<\/a><\/p>\n

 <\/p>\n

\"ss2\"<\/a><\/p>\n

 <\/p>\n

\"ss1\"<\/a><\/p>\n

And a video:<\/p>\n